The mini cylinder is the cylinder that bore and stroke are both very small. The function of the cylinder is to convert the pressure energy of the compressed air into mechanical energy. The drive mechanism acts as a linear reciprocating motion, swinging and rotating motion.
1. Cylinder is a cylindrical metal part that guides the piston to reciprocate in a straight line. Working fluid expands the heat energy into mechanical energy in the engine cylinder by expansion, and the gas is compressed by the piston in the compressor cylinder to increase the pressure.
2. The shell of a turbine, a rotary piston engine, also called a cylinder". The application fields of cylinder are printing (tension control), semiconductor (spot welder, chip grinding), automatic control, robot and so on.
qs
2017年11月22日星期三
The mini cylinder is the cylinder that bore and stroke are both very small
2017年11月15日星期三
Pilot pressure regulator pressure regulating steps
Pilot pressure regulator pressure regulating steps
1, First, close the gate valve before the pilot type pressure reducing valve, and then open the gate valve on the pilot type reducing valve to realize the low pressure state in the downstream.
2, the pilot valve regulator screw counterclockwise rotation to the top position, remember not to rotate clockwise, and then close the pilot valve on the back of the valve.
3, slowly open the pilot valve before the pilot valve, know the valve is fully open.
4, this time, the pilot valve needs to be turned clockwise, mainly to adjust the outlet pressure to the required pressure.
5, as in the adjustment of the pilot valve when the outlet pressure than the pressure set higher, it is necessary to stop the following operation, and then from the first step to readjust.
1, First, close the gate valve before the pilot type pressure reducing valve, and then open the gate valve on the pilot type reducing valve to realize the low pressure state in the downstream.
2, the pilot valve regulator screw counterclockwise rotation to the top position, remember not to rotate clockwise, and then close the pilot valve on the back of the valve.
3, slowly open the pilot valve before the pilot valve, know the valve is fully open.
4, this time, the pilot valve needs to be turned clockwise, mainly to adjust the outlet pressure to the required pressure.
5, as in the adjustment of the pilot valve when the outlet pressure than the pressure set higher, it is necessary to stop the following operation, and then from the first step to readjust.
2017年11月8日星期三
Pilot solenoid valve features
Pilot solenoid valve features:
Pilot diaphragm structure, low-function.
Protective diaphragm structure design, life expectancy doubled.
Piping can be installed at any angle, it is best to enhance the life of the horizontal tube coil up.
Coil protection class IP65.
Applicable medium: liquid, water, hot water, gas, oil, gas and so on.
Pilot diaphragm structure, low-function.
Protective diaphragm structure design, life expectancy doubled.
Piping can be installed at any angle, it is best to enhance the life of the horizontal tube coil up.
Coil protection class IP65.
Applicable medium: liquid, water, hot water, gas, oil, gas and so on.
订阅：
博文 (Atom)