24v solenoid valve have good tightness

24v solenoid valve is used in automatic switch control system: automatic electrical cleaning equipment, solar water heaters, garden irrigation, infrared sensors, automatic charging system for water supplying, and so on.This valve cuts down the flow of fuel to engine in case vehicle crosses limiting speed and thus prevent the vehicle to over speed in any condition. solenoid valve good tightness and sensitive reaction; Double control solenoid valves have memory function; Internal hole adopts special processing technology which has little attrition friction,low start pressure and long service life; no need to add oil for lubrication; It is available to form integrated valve group with the base to save installation space.

standard air cylinder

From the standard air cylinder to the-large and-powerful, Jelpc offers an impressive choice of pneumatic cylinders. Short cylinders, compact cylinders, round cylinders and cylinders with aluminum profiles, as well as large cylinders up to 320mm in diameter . 

The air cylinders has the field of round cylinders and tie rods well and truly covered, too – stainless steel fittings crafted for special use are also available.

Three way solenoid valves have long-life operation

solenoid valve is an isolated type with an Elastomeric membrane that hermetically isolates the solenoid actuator from the fluid, making it less sensitive to abrasive or contaminated fluids thus providing a safe, and long-life operation. The unique pivoted armature switching mechanism does not require a minimum operating pressure and is unaffected by its mounting position. The solenoids coil is continuous duty design and is encapsulated in a compact Epoxy construction that is suited for corrosive environments. The 3-way solenoid valve, Isolating Membrane type is suitable for activating deluge or other water Control Valves using freshwater, corrosive, contaminated fluids or air. 3v solenoid valve is a valve with three ports, usually for mixing or diverting applications. Typically, it is comprised of one inlet and two outlets, but can also be found with one outlet and two inlets in some cases. The inlet port is usually the pressure port, with one outlet normally closed (no flow) and one outlet normally open. 

Wider Application Flexibility of the 4 way solenoid valves

4 way solenoid valves is the simplest method of stepping a multiposition air actuator. Energizing the solenoid steps the valve to its next position, and de-energizing the solenoid resets the mechanical ratchet in the actuator. This implementation, not recommended for two position actuators, can be useful when only a limited number of external events is available on the data system. CE-approved versions are also available.

The direct acting solenoid valves Solenoid Coils and Connectors Provide Quick, Clean Connections:

Coils are Class F rated for 100% duty cycle applications at 122-degrees F (50-degrees C). AC or DC coils can be interchanged on the same solenoid stem. Each Solenoid connector acts as its own junction box, with molded connectors and gaskets to protect electrical connections. Design meets NEMA-4 classifications.

JELPC solenoid valves industrial applications

We offer solenoid valves that feature two or more ports to help more industrial applications accomplish more tasks. For example, 2-way valves feature one inlet and one outlet port and a single orifice, while 3-way valves feature three port connections and two valve orifices. At Solenoid Solutions, our extensive product line includes miniature, subminiature, high-capacity and low-wattage solenoid valves.

JELPC Air and Water 3-Way Solenoid Valves

JELPC 3 way solenoid valves is available with external for zero minimum pressure requirements. Pilot Solenoid operated diaphragm valves available in normally closed and normally open constructions. Available either AC or DC operated with Brass or Stainless Steel bodies for a wide variety of high flow applications.

JELPC stainless steel round body cylinders

The pneumatic air cylinders are an ideal choice for a host of applications in a broad range of industries. Dimensionally interchangeable with leading cylinder manufacturers, the stainless steel pneumatic cylinders is perfect for replacement applications as well as new designs. There's no maintenance required with these non-repairable cylinders, just millions of trouble-free cycles.